[1] Aliakbar Asgharpourdivkolaei, Mohammad Bakhshi-jooybari, Hamid Gorji, "Experimental and Numerical Investigation of Effective Parameters and Optimization of Bending Angle by Response Surface Method in Laser Bending of Aluminum Sheets using Pulsed Nd: YAG Laser", Lasers in Manufacturing and Materials Processing, 11 : 529 - 563, 2024.

[2] علي اكبر اصغرپور, Mohammad Bakhshi-jooybari, Hamid Gorji, "", , 36 : 1 - 24, 2024.

[3] Aliakbar Asgharpourdivkolaei, Hamid Gorji, Seyed Ehsan Delpazir, "Experimental and numerical investigation to determine the optimal blank-holder force in deep drawing process based on forming force for SS304L and St14 sheets", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46 : 1 - 17, 2024.

[4] Reza Mousavipour, Hamid Gorji, Mohammad Bakhshi-jooybari, Mohsen Shakeri, "Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process", International Journal of Engineering, 37 : 675 - 691, 2023.

[5] Emad Seyyedi, Hamid Gorji, Mohammad Bakhshi-jooybari, Mohammad Javad Mirnia, "Comparison between conventional press-working and incremental forming in hole-flanging of AA6061-T6 sheets using a ductile fracture model", INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 270 : 112225 - , 2023.

[6] Reza Azadi, Hamid Gorji, Mohammad Hadi Pashaei, Mohammad Bakhshi-jooybari, Yasser Rostamiyan, "Experimental investigation of the compressive strength of hybrid composite sandwich beams with double-corrugated sinusoidal core reinforced by graphene and polyurethane foam", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, : 1464420722 - , 2022.

[7] Reza Azadi, Mohammad Hadi Pashaei, Hamid Gorji, Mohammad Bakhshi-jooybari, Yasser Rostamiyan, "Experimental and statistical investigation of the three-point bending strength of the composite sandwich beams with trapezoidal core", JOURNAL OF COMPOSITE MATERIALS, 56 : 4675 - 4692, 2022.

[8] Ali Asghar Zolfaghari Darzi, Hamid Gorji, Mohammad Bakhshi-jooybari, Roohollah Jamaati, "Microstructure, mechanical, and electrical properties of the pure copper tubes processed by hydro-assisted tube pressing (HATP) as a new severe plastic deformation method", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 118 : 3161 - 3182, 2022.

[9] Hossein Mamusi, Mohammad Bakhshi-jooybari, Hamid Gorji, Ramin Hashemi, "A novel experimental approach in determining forming limit diagrams by considering the effect of normal pressure", International Journal of Material Forming, 15 : 1 - 20, 2022.

[10] Emad Seyyedi, Hamid Gorji, Mohammad Javad Mirnia, Mohammad Bakhshi-jooybari, "Prediction of ductile damage and fracture in the single- and multi-stage incremental hole-flanging processes using a new damage accumulation law", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, : 1 - 24, 2022.

[11] Behzad Akbarzadeh, Hamid Gorji, Mohammad Bakhshi-jooybari, Roohollah Jamaati, Mohammad Javad Mirnia, "Investigation of mechanical and microstructural properties of pure copper processed by combined extrusion-equal channel angular pressing (C-Ex-ECAP)", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 113 : 2175 - 2191, 2021.

[12] , Hamid Gorji, Mohammad Reza Shabgard, Mohammad Bakhshi-jooybari, "Investigating the Effect of Electrical Discharge Process Input Parameters on Mechanical Properties of Aluminum Surface", International Journal of Advanced Design and Manufacturing Technology, 14 : 9 - 15, 2021.

[13] Maziar Khademi, Hamid Gorji, Mohammad Bakhshi-jooybari, "Effects of material and process parameters on wrinkling of conical parts in modified hydroforming process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 116 : 259 - 279, 2021.

[14] Emad Seyyedi, Mohammad Bakhshi-jooybari, Hamid Gorji, Mohammad Javad Mirnia, "An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming", Journal of Stress Analysis, 6 : 29 - 46, 2021.

[15] Abolfazl Rajabloo, Hamid Gorji, Mohammad Bakhshi-jooybari, "Determination of Dynamic Characteristics of Aluminum 1050 Sheet Using Electromagnetic Forming Ring Expansion Test", METALS AND MATERIALS INTERNATIONAL, : 1 - 15, 2021.

[16] Nafiseh Mohammadtabar, Mohammad Bakhshi-jooybari, Hamid Gorji, Roohollah Jamaati, Jerzy A. Szpunar, "Effect of electric current pulse type on springback, microstructure, texture, and mechanical properties during V-bending of AA2024 aluminum alloy", JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 143 : 1 - 36, 2021.

[17] Saeid Zavari, Mohammad Bakhshi-jooybari, Hamid Gorji, "Combined electrohydraulic and flexible pin die forming: a novel high strain rate forming die setup", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 111 : 2171 - 2187, 2020.

[18] ROHALLAH PANAHI LIAVOLI, Hamid Gorji, Mohammad Bakhshi-jooybari, Mohammad Javad Mirnia, "Investigation on Formability of Tailor-Welded Blanks in Incremental Forming", International Journal of Engineering, 33 : 906 - 915, 2020.

[19] Hossein Talebi-Ghadikolaee, Hassan Moslemi Naeini, Mohammad Javad Mirnia, Mohammad Ali Mirzai, Hamid Gorji, Sergei Alexandrov, "Ductile fracture prediction of AA6061-T6 in roll forming process", MECHANICS OF MATERIALS, 148 : 103498 - , 2020.

[20] Hossein Talebi-Ghadikolaee, Hassan Moslemi Naeini, Mohammad Javad Mirnia, Mohammad Ali Mirzai, Hamid Gorji, Sergei Alexandrov, "Fracture analysis on U-bending of AA6061 aluminum alloy sheet using phenomenological ductile fracture criteria", THIN-WALLED STRUCTURES, 148 : 106566 - 106566, 2020.

[21] , Mohammad Bakhshi-jooybari, Hamid Gorji, Seyed Jamal Hosseinipour, M. HoseinzadehAmirdehi, "Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP", Journal of Stress Analysis, 5 : 83 - 99, 2020.

[22] Mostafa Vahdani, Mohammad Javad Mirnia, Hamid Gorji, Mohammad Bakhshi-jooybari, "Experimental Investigation of Formability and Surface Finish into Resistance Single-Point Incremental Forming of Ti-6Al-4V Titanium Alloy Using Taguchi Design", TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 : 1031 - 1041, 2019.

[23] Mostafa Vahdani, Mohammad Javad Mirnia, Mohammad Bakhshi-jooybari, Hamid Gorji, "Electric hot incremental sheet forming of Ti-6Al-4V titanium, AA6061 aluminum, and DC01 steel sheets", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103 : 1199 - 1209, 2019.

[24] Vahid Modanloo, Hamid Gorji, Mohammad Bakhshi-jooybari, "A Comprehensive Thinning Analysis for Hydrodynamic Deep Drawing Assisted by Radial Pressure", Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, 43 : 487 - 494, 2019.

[25] , Mohammad Bakhshi-jooybari, Seyed Jamal Hosseinipour, Hamid Gorji, "Improvement of Die Corner Filling of Stepped Tubes Using Warm Hybrid Forming", International Journal of Engineering, Transactions A: Basics, 32 : 587 - 595, 2019.

[26] Hossein Talebi-Ghadikolaee, Hassan Moslemi Naeini, Mohammad Javad Mirnia, Mohammad Ali Mirzai, Sergei Alexandrov, Hamid Gorji, "Experimental and numerical investigation of failure during bending of AA6061 aluminum alloy sheet using the modified Mohr-Coulomb fracture criterion", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 105 : 5217 - 5237, 2019.

[27] , Hamid Gorji, Mohammad reza Shabgard, Salman Nourouzi, "Experimental Study on the Surface Modification by Electrical Discharge Process", Journal of Applied and Computational Mechanics, 5 : 100 - 108, 2019.

[28] Masoomeh Salahshoor, Hamid Gorji, Mohammad Bakhshi-jooybari, "Analysis of the effects of tool and process parameters in hydrodynamic deep drawing assisted by radial pressure", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 : 1 - 16, 2019.

[29] , Mohammad Bakhshi-jooybari, Hamid Gorji, Mohsen Shakeri, Maziar Khademi, "Investigation of Forming Cylindrical Parts in a Modified Hydrodynamic Deep Drawing Assisted by Radial Pressure With Inward Flowing Liquid", JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 140 : - , 2018.

[30] , Hamid Gorji, Mohammadreza shabghard, Salman Nourouzi, "", , 17 : 69 - 74, 2018.

[31] , Mohammad Reza Shabgard, Hamid Gorji, Salman Nourouzi, "Improving the Surface Wear Resistance of Aluminum by Electrical Discharge Process", Journal of Advanced Materials and Processing, 6 : 24 - 33, 2018.

[32] , Mohammad Bakhshi-jooybari, Mohsen Shakeri, Hamid Gorji, Maziar Khademi, "Optimization of pressure paths in hydrodynamic deep drawing assisted by radial pressure with inward flowing liquid using a hybrid method", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 97 : 2587 - 2601, 2018.

[33] Maziar Khademi, Hamid Gorji, Mohammad Bakhshi-jooybari, , "Investigation of Wrinkling in Hydrodynamic Deep Drawing Assisted by Radial Pressure with Inward Flowing Liquid", Procedia Engineering, 183 : 65 - 70, 2017.

[34] Ali Taghizadeh Armeki, Jafar Bazrafshan, Hamid Gorji, "Investigation of step pressure path influence on cylindrical cup formation through hydrodynamic deep drawing", Advances in Materials and Processing Technologies, 3 : 174 - 185, 2017.

[35] , Mohammad Bakhshi-jooybari, Hamid Gorji, Seyed Jamal Hosseinipour, "Experimental and numerical analysis of hydrodynamic deep drawing assisted by radial pressure at elevated temperatures", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 88 : 185 - 195, 2017.

[36] Nafiseh Mohammadtabar, Mohammad Bakhshi-jooybari, Seyed Jamal Hosseinipour, Hamid Gorji, "Feasibility study of a double-step hydroforming process for fabrication of fuel cell bipolar plates with slotted interdigitated serpentine flow field", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 85 : 765 - 777, 2016.

[37] , Mohammad Bakhshi-jooybari, Hamid Gorji, Hamid Baseri, "Application of adaptive neuro fuzzy inference system and genetic algorithm for pressure path optimization in sheet hydroforming process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 86 : 2667 - 2677, 2016.

[38] Ebrahim Nateghi, Hamid Gorji, "Experimental and numerical investigation into effect of weld configuration geometry on distribution of residual stress and temperature in the welded parts of stainless steel", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 87 : 2391 - 2404, 2016.

[39] , Hamid Gorji, Mohammad Bakhshi-jooybari, "A new method for compression bending of thin-walled tubes in hydro-bending process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 85 : 557 - 571, 2016.

[40] Vahid Modanloo, Hamid Gorji, Mohammad Bakhshi-jooybari, "Effects of forming media on hydrodynamic deep drawing", Journal of Mechanical Science and Technology, 30 : 2237 - 2242, 2016.

[41] , Hamid Gorji, Mohammad Bakhshi-jooybari, Hamid Baseri, "Artificial intelligence approach to predict thinning in the hydroforming process", Advances in Materials and Processing Technologies, 61 : 1 - 6, 2016.

[42] , Hamid Gorji, Mohammad Bakhshi-jooybari, "Modelling the failure behaviour of magnesium alloy sheet forming at warm temperatures by using new hybrid ICA-ANFIS model", Advances in Materials and Processing Technologies, 2 : 103 - 114, 2016.

[43] Masoomeh Salahshoor, Hamid Gorji, Mohammad Bakhshi-jooybari, "The study of forming concave-bottom cylindrical parts in hydroforming process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 79 : 1139 - 1151, 2015.

[44] , Mohammad Bakhshi-jooybari, Seyed Jamal Hosseinipour, Hamid Gorji, "A new process of forming metallic bipolar plates for PEM fuel cell with pin-type pattern", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 77 : 1281 - 1293, 2015.

[45] Masoomeh Salahshoor, Hamid Gorji, Mohammad Bakhshi-jooybari, "Investigation of the Effects of Pressure Path and Tool Parameters in Hydrodynamic Deep Drawing", INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION, 27 : 1155 - 1166, 2014.

[46] , Mohammad Bakhshi-jooybari, Hamid Gorji, Hamid Baseri, "Optimization of Pressure Path in Sheet Hydroforming Process Using Artificial Intelligence and Simulated Annealing", KEY ENGINEERING MATERIALS, 623 : 772 - 779, 2014.

[47] , Seyed Jamal Hosseinipour, Salman Nourouzi, Hamid Gorji, "A different approach for considering the effect of non-proportional loading path on the forming limit diagram of AA5083", MATERIALS and DESIGN, 50 : 165 - 173, 2013.

[48] , Hamid Baseri, Mohammad Bakhshi-jooybari, Hamid Gorji, "Pressure path optimization of hydrodynamic deep drawing of cylindrical-conical parts", International Journal of Precision Engineering and Manufacturing, 14 : 2095 - 2100, 2013.

[49] , Seyed Jamal Hosseinipour, Mohammad Bakhshi-jooybari, Hamid Gorji, "Forming Metallic Micro-Feature Bipolar Plates for Fuel Cell Using Combined Hydroforming and Stamping Processes", iranica journal of energy and environment, 4 : 91 - 98, 2013.

[50] , Hamid Gorji, Mohammad Bakhshi-jooybari, Salman Nourouzi, "Study on the Effect of Forming Parameters in Sheet Hydrodynamic Deep Drawing Using FEM-based Taguchi Method", International Journal of Advanced Design and Manufacturing Technology, 6 : 87 - 99, 2013.

[51] , , Mohammad Bakhshi-jooybari, Hamid Gorji, "Study of the effect of material properties and sheet thickness on formability of conical parts in hydro-mechanical deep drawing assisted by radial pressure", Advanced Materials Research, 445 : 149 - 154, 2012.

[52] , , Mohammad Bakhshi-jooybari, Hamid Gorji, "Effect of punch profile on thickness distribution in hydromechanical deep drawing of conical-cylindrical parts", Advanced Materials Research, 445 : 143 - 148, 2012.

[53] Hamid Gorji, Mohammad Bakhshi-jooybari, , Salman Nourouzi, Seyed Jamal Hosseinipour, "Investigation of hydrodynamic deep drawing for conical-cylindrical cups", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 56 : 915 - 927, 2011.

[54] Salman Nourouzi, Hamid Gorji, Mohammad Bakhshi-jooybari, Seyed Jamal Hosseinipour, Ghorban Mohammad ali nezhad omran, "The effect of bending radius on thickness distribution in hydroforming of conical-cylindrical cups", Advanced Materials Research, 286 : 1362 - 1365, 2011.

[55] Hamid Gorji, Mohammad Bakhshi-jooybari, Salman Nourouzi, Seyed Jamal Hosseinipour, Ghorban Mohammad ali nezhad omran, "Finite element simulation and experimental study of the effect of cone angle on thickness distribution in hydroforming of conical-cylindrical cups", Advanced Materials Research, 286 : 1385 - 1388, 2011.

[56] Salman Nourouzi, Amir Yaghoubi Espoorezi, Mohammad Bakhshi-jooybari, Hamid Gorji, "Experimental Study of Drawing Load Curves in Forming Conical Parts by Hydroforming and Conventional Deep Drawing Processes", Advanced Materials Research, 296 : 556 - 560, 2011.

[57] Hamid Gorji, Mohammad Bakhshi-jooybari, Salman Nourouzi, Seyed Jamal Hosseinipour, Ghorban Mohammad ali nezhad omran, "The effect of process parameters on thickness distribution in hydroforming of conical-cylindrical cups", KEY ENGINEERING MATERIALS, 473 : 176 - 181, 2011.

[58] Mohammad Bakhshi-jooybari, Hamid Gorji, , , Ghorban Mohammad ali nezhad omran, "A NEW DIE DESIGN FOR SHEET HYDROFORMING OF COMPLEX INDUSRIAL PARTS", Advanced Materials Research, 86 : 1084 - 1091, 2010.

[59] M H, Mohammad Bakhshi-jooybari, Mohsen Shakeri, , Hamid Gorji, "Application of Taguchi Method in Optimization of New Hydroforming Die Design", STEEL RESEARCH INTERNATIONAL, 81 : 647 - 660, 2010.

[60] , Mohammad Bakhshi-jooybari, Mohsen Shakeri, , Hamid Gorji, "Taguchi Method in Optimization of New Hydroforming Die Design", STEEL RESEARCH INTERNATIONAL, 81 : 647 - 650, 2010.

[61] , , Mohammad Bakhshi-jooybari, Hamid Gorji, Salman Nourouzi, Seyed Jamal Hosseinipour, "Novel combined standard hydromechanical sheet hydroforming process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 224 : 447 - 457, 2010.

[62] Mohammad Bakhshi-jooybari, , Hamid Gorji, "Numerical and experimental investigation of the effect of the pressure path on forming metallic bellows", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 224 : 95 - 101, 2010.

[63] , Mohammad Bakhshi-jooybari, Hamid Gorji, "A new die design for the hydroforming of stepped tubes", International Journal of Material Forming, 3 : 71 - 75, 2010.

[64] , Mohammad Bakhshi-jooybari, Hamid Gorji, Seyed Jamal Hosseinipour, Salman Nourouzi, "New die design for improvement of die corner filling in hydroforming of cylindrical stepped tubes", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 223 : 821 - 827, 2009.

[65] Mohammad Bakhshi-jooybari, , , Hamid Gorji, "The study of spring-back of CK67 steel sheet in V-die and U-die bending processes", MATERIALS and DESIGN, 30 : 2410 - 2419, 2009.

[66] , Ghorban Mohammad ali nezhad omran, Mohammad Bakhshi-jooybari, Hamid Gorji, "An investigation on springback/negative springback phenomena using finite element method and experimental approach", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 223 : 841 - 850, 2009.

[67] Majid Elyasi, Mohammad Bakhshi-jooybari, Hamid Gorji, "Mechanism of improvement of die corner filling in a new hydroforming die for stepped tubes", MATERIALS and DESIGN, 30 : 3824 - 3830, 2009.

[68] Mohammad Bakhshi-jooybari, , Hamid Gorji, Ghorban Mohammad ali nezhad omran, Seyed Jamal Hosseinipour, Salman Nourouzi, "Investigation of Die Corner Filling in Hydroforming of Cylindrical Stepped Tubes Using Finite Element Simulation and Experiment", KEY ENGINEERING MATERIALS, : 335 - 343, 2009.

[69] , Mohammad Bakhshi-jooybari, , Hamid Gorji, "Experimental and numerical study of energy consumption in forward and backward rod extrusion", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177 : 612 - 616, 2006.

[70] Mohammad Bakhshi-jooybari, , Seyed Jamal Hosseinipour, Mohsen Shakeri, Hamid Gorji, "Experimental and numerical study of optimum die profile in backward rod extrusion", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177 : 596 - 599, 2006.

[71] , Mohammad Bakhshi-jooybari, Seyed Jamal Hosseinipour, Hamid Gorji, "Experimental and numerical study of optimal die profile in cold forward rod extrusion of aluminum", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 164-165 : 1572 - 1577, 2005.